DIY: 7 Naughty-but-Nice Quick Fixes
Written by: uzair
Fri 08 Jun 2012
We all want to avoid bodged jobs in DIY, and normally a thorough approach will save time, money and stress in the long run. However, there are a few rare situations where you can cut corners - these quick fixes feel rather naughty, but they’re harmless and will save you time and allow you to correct mistakes quickly.
Depending on your current surface, you might hang lining paper prior to the wallpaper proper. If you find you’ve hung it and there are small gaps between the sheets (annoying) put Pollyfilla between the gaps and let it dry before you put the final paper on top – it feels like cheating but it works! To quickly fix areas of peeling wallpaper, apply wallpaper paste to an ordinary piece of A4 paper, an rub it on the underneath of the peeling wallpaper. Smooth it down, then wipe over with a damp cloth to remove bubbles.
Removing a Painted-Over Screw
You can use something called a screw extractor to remove broken or painted-over screws, but not many of us have one of these just knocking about the place. Instead, you can grab another nail or screw, hold it with a pair of pliers, and use a lighter or a match to heat the head until it’s red hot. Then just touch it to the painted –over nail or screw, and the paint will peel off. Then leave it to cool (as it will have expanded from the heat), and remove it.
There’s no need to paint the bottom of the bottom shelf, or the top of the top shelf, if no-one can see them – sneaky!
Fixing a Broken Chain
Got a chain securing a gate or a garage door? There’s no need to replace the whole chain if one link breaks. Simply place a bolt, with suitably-sized nuts either end, through the two nearest whole links, thereby attaching them together.
Unless you’ve got some good carpentry skills, making the holes for hinges to go in can be a pain when hanging a new door. Get round this buy choosing “flush hinges”, which don’t require any sawing or chiseling.
Many tools need professional sharpening, but with a chisel you can just run it over a piece of sandpaper several times. Don’t be too vigorous or it might catch fire – just joking.
This one’s a winner- rather than tweaking squeaking floorboards, simply sprinkle talcum powder over the offending boards and brush it into the gaps. Hopefully that should stop the squeak.
We hope these naughty but nice DIY shortcut tips have been useful, and we wish you the best of luck with the exciting project that is renovating your new home, or sprucing up your current property to add value before you place it on the market.